[newbuilderkid]

I recently decided to order parts and build my first computer (here are the parts):

http://www.newegg.com/Product/Produc...82E16813128052
http://www.newegg.com/Product/Produc...82E16817182016
http://www.newegg.com/Product/Produc...82E16824254024
http://www.newegg.com/Product/Produc...82E16832116204
http://www.newegg.com/Product/Produc...82E16819103773
http://www.newegg.com/Product/Produc...82E16820231098
http://www.newegg.com/Product/Produc...82E16822148140
http://www.newegg.com/Product/Produc...82E16811144151
(I bought two of the memory packages for a total of 4GB, I also thought that the parts were compatable)

I assembled the parts and I thought the only error I might have made was in connecting the power supply to the components. However, when I pressed the power button all the lights and fans went on and I know the disk drive was working. Using a HDMI connection (and I tried VGA), the monitor remained blank. No bios came up and there was no beeping or shutting off or over heating.

Does anyone have any advice? I would really appreciate it.

[SocialWarfare]

Unfortunately none of your links seem to work

[newbuilderkid]

Sorry about the links:

GIGABYTE GA-MA69G-S3H Socket AM2 AMD 690G ATX AMD Motherboard

APEVIA X-Cruiser-BK Black Steel ATX mid tower computer case

AMD Athlon 64 X2 6000+ Windsor 3.0GHz Socket AM2 Processor

2 of G.Skill 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory

Seagate Barracuda 7200.10 (Perpendicular Recording Technology) 320GB 7200 RPM SATA 3.0Gb/s Hard drive

Hans-G 22" 5mss Widescreen HDMI LCD Monitor

Rosewill RP500-2 ATX 2.01 500 W Power Supply

[SocialWarfare]

Do you have both the 24 and 4 pin plugged into your motherboard from your PSU?

[newbuilderkid]

yes, those are the only two wires from the power supply I have plugged in to the motherboard

i was wondering: do i really need the 4 pin if the video card is build in and I don't have a pci card

[Dave Hybrid]

A good guide here, let us know how you get on.

http://www.thecomputerforums.co.uk/f...-how-fix-5270/

[Spencer2004]

check if the first ram slot which should be differently colored than the other ones has a ram module in it, as most motherboards require this. also check that the cpu is properly inserted.

if this doesn't work remove all but one of the ram modules making sure the remaining one is in the first ram slot. another reason could be the jumper(s) are incorrectly set so you will need to refer to you motherboards manual.

Hope this helps!!

[gkr]

Blank screen problem has to do with mostly operating system if it comes just after the OS loads and about to login. Format the drive and install a good OS.