lesser-equity

Magazine
Go Back   Computer Juice > Computer Hardware > General Hardware Chat

Register


 Default 

New Build Computer - Not Turning on




Reply
 
Thread Tools
  #1  
Old 8th Jun 2009, 09:35
New Member Group
 
Default New Build Computer - Not Turning on

Hey!
I just built my own pc.
it has a 160GB Western Digital Hard Drive
A Samsung WriteMaster DVD Writer
An ASUS P5SD2-VM Motherboard
Intel Core 2 Duo E7400
1GB Kingston DIMM
An Nvidia Ge Force 9500GT Card
A 400W PSU

So here's the problem. After I finished building it, I just connected the monitor, keyboard and mouse, and the PSU.
Now as i connected the cable to the PSU, this LED on the motherboard turned on and this kind've soft buzzing sound started coming from the PSU. I then pressed the POWER ON button, and it turned on. The CPU fan was spinning, the hard disk was on (I could hear it) and even the heatsink fan on the Nvidia 9500GT was on. But nothing appeared on my monitor, and I didn't even hear the boot-up BEEP sound. I disconnected the monitor, tried again, but the same thing happened.
I don't know what's wrong. I think its the PSU, but not really sure about it. I disconnected the DVD Writer and tried it, but still no luck.
I even disconnected the heatsink and processor and put it back on again, but nothing's happening.

I've checked the cables on the motherboard,they seem to be ok too.

ANy hep guys? Its really urgent.
ANd yeah, its the first time I've built a PC.
  #2  
Old 8th Jun 2009, 11:29
Donor Group
 
Default New Build Computer - Not Turning on

It does sound like a bad PSU, but recheck all your connections.
Double check the power and reset leads are connected correctly.

Also .... silly question maybe, but you did use the stand-offs for the motherboard ... yes ?
__________________

My System: Home Build

Processor(s):
AMD 64 x 2 Dual Core 5200+ 2.60GHz
Motherboard:
Asus M2V Rev 1.
RAM Memory:
4gb (3.25gb visible)
Graphics Card(s):
NVIDIA GeForce 7300 GS
Sound Card:
5.1 Reatek On-Board
Hard Drive(s):
250 gb SATA & 400gb SATA
Optical Drive(s):
Pioneer 110 x 2
Case / PSU:
Stock / 550w Silent
Cooling:
Stock
Network / Internet:
10/100 Nic / 20MB Virgin Cable
Monitor(s):
Fujitsu Siemens 22" TFT WS
Operating System(s):
Vista Ultimate x32/Windows 7 x64
  #3  
Old 8th Jun 2009, 12:10
Donor Group
 
Default New Build Computer - Not Turning on

> A 400W PSU

Don't you think it might be a good idea to give slightly more information about the most likely point of failure?
__________________
"I loved the P182 so much that, when my wife's system was all noisy and needed all sorts of cleaning, I bought her one. Then, when I wanted a cat, I bought a P182. The P182 is not a cat per se, but it's still an excellent buy."
__________________

My System: 日夏子

Processor(s):
Core 2 Duo E6400 2.13 -> 3.01ghz
Motherboard:
MSI P6N SLI Platinum LGA 775
RAM Memory:
2GB Patriot Extreme Performance
Graphics Card(s):
PNY 8800GTS 320MB
Sound Card:
Sound Blaster Xtremegamer 7.1
Hard Drive(s):
80GB + 500GB
Optical Drive(s):
2x SATA
Case / PSU:
Antec 900 + 620W Aerocool zeroDBA
Cooling:
4x 120mm Yate-Loon + 200mm top
Network / Internet:
Qwest
Monitor(s):
Dell 22" S2209W (1920x1080)
Operating System(s):
Windows XP + 7
Reply

Register
Thread Tools




Arabic Bulgarian Chinese (Simplified) Chinese (Traditional) Croatian Czech Danish Dutch English Finnish French German Greek Hebrew Hungarian Italian Japanese Korean Latvian Lithuanian Norwegian Polish Portuguese Romanian Russian Serbian Slovak Spanish Swedish Thai Turkish Ukrainian

Copyright ©2006 - 2009 Computer Juice.

Powered by vBulletin® Copyright ©2000 - 2009 Jelsoft Enterprises Ltd. SEO by vBSEO ©2009, Crawlability, Inc.