lesser-equity

Magazine
Go Back   Computer Juice > Computer Hardware > Graphics Cards & Monitors

Register


Default Packard Bell TFT Monitor

Hi Please help. I dunno whats happen to my tft screen. It was ok till now. Just turned it on and comes on fine but there is sort of a colour issue as it is all red. I have disconnected everything and restarted everything but is still the same. Not ...


Reply
 
Thread Tools
  #1  
Old 28th Jan 2008, 14:51
Member Group
 
Posts: 98
Default Packard Bell TFT Monitor

Hi

Please help. I dunno whats happen to my tft screen. It was ok till now. Just turned it on and comes on fine but there is sort of a colour issue as it is all red.

I have disconnected everything and restarted everything but is still the same. Not very good even to look at it for 5 min as it starts glaring into your eyes??

I have tried all the clour resolutuon etc but nothing works
  #2  
Old 28th Jan 2008, 21:50
Donor Group
 
Skill Level: Advanced
Posts: 3,277
Default Packard Bell TFT Monitor

Sometimes analog monitors will change colors if a pin is loose. I had an issue with my old CRT as it would sometimes turn a slight yellow color if it was not in all the way.
__________________
"I loved the P182 so much that, when my wife's system was all noisy and needed all sorts of cleaning, I bought her one. Then, when I wanted a cat, I bought a P182. The P182 is not a cat per se, but it's still an excellent buy."
__________________

My System: 日夏子

Processor(s):
Core 2 Duo E6400 2.13 -> 3.01ghz
Motherboard:
MSI P6N SLI Platinum LGA 775
RAM Memory:
2GB Patriot Extreme Performance
Graphics Card(s):
PNY 8800GTS 320MB
Sound Card:
Sound Blaster Xtremegamer 7.1
Hard Drive(s):
80GB + 500GB
Optical Drive(s):
2x SATA
Case / PSU:
Antec 900 + 620W Aerocool zeroDBA
Cooling:
4x 120mm Yate-Loon + 200mm top
Network / Internet:
Qwest
Monitor(s):
Dell 22" S2209W (1920x1080)
Operating System(s):
Windows XP + 7
  #3  
Old 29th Jan 2008, 12:14
Member Group
 
Posts: 98
Default Packard Bell TFT Monitor

Quote:
Originally Posted by Carbon View Post
Sometimes analog monitors will change colors if a pin is loose. I had an issue with my old CRT as it would sometimes turn a slight yellow color if it was not in all the way.
Thank you. Looked at the the pins . one was out of place.

ash
Reply

Donate

Register

Bookmarks

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to upgrade RAM & Processor of Packard Bell GA-8SIML [motherboard] Samantha0101 CPUs, Motherboards & RAM 7 12th Jan 2009 13:15
Packard Bell Easynote R1938 wireless help gorevan Networking, Modems & VoIP 3 25th May 2008 14:34
Packard Bell Master Disks Don't Work SlapnutSkits General Software Chat 1 20th Feb 2008 02:56
Packard Bell 2422 chrisc90 PC & Console Gaming 2 4th Jan 2008 18:59
Packard Bell Lappys jeystone Laptops, Mobiles & PDAs 2 7th May 2007 07:24
Thread Tools




Arabic Bulgarian Chinese (Simplified) Chinese (Traditional) Croatian Czech Danish Dutch English Finnish French German Greek Hebrew Hungarian Italian Japanese Korean Latvian Lithuanian Norwegian Polish Portuguese Romanian Russian Serbian Slovak Spanish Swedish Thai Turkish Ukrainian

Copyright ©2006 - 2009 Computer Juice.

Powered by vBulletin® Copyright ©2000 - 2009 Jelsoft Enterprises Ltd. SEO by vBSEO ©2009, Crawlability, Inc.