|
|
|||||||
|
 Cannot Run Memory In Dual Channel Mode (Help)
|
|
|
|
Recently I have upgraded my cpu from a AMD Athlon 3800+ to a Athlon 5200+ x2 and I'm unable to boot using dual channel mode configuration, all I get is a blank screen with flashing cursor, no post beeps nothing. At the moment Im using single channel mode without any ...
|
 |
|
|
Thread Tools |
|
#1
23rd Aug 2008, 12:21
|
|||
|
|||
|
Cannot Run Memory In Dual Channel Mode (Help)
Recently I have upgraded my cpu from a AMD Athlon 3800+ to a Athlon 5200+ x2 and I'm unable to boot using dual channel mode configuration, all I get is a blank screen with flashing cursor, no post beeps nothing. At the moment Im using single channel mode without any problems. I have 4 dimm slots on the board as follows:- 1= black 2= yellow 3= black 4=yellow.
Putting my memory in both the yellow or black slots = dual channel Putting my memory in a black slot and a yellow slot = single channel I have updated my bios to the latest firmware and the bios is set to auto detection. I have tried manualy configuring the memory in the bios including timings and voltage, but still wont boot in dual channel.... Any help would be very much appreciated My system:- Asus m2n sli deluxe x2 512 Corsair xms2 5400 cpu Amd Athlon 5200+ x2 2.7ghz |
|
#2
10th Sep 2008, 04:41
|
|||
|
|||
|
Cannot Run Memory In Dual Channel Mode (Help)
make sure they are the same type of memory **IE** Simm, Dimm or Rimm
|
|
#3
10th Sep 2008, 05:26
|
||||||||||||
|
||||||||||||
|
Cannot Run Memory In Dual Channel Mode (Help)
Send them back to Corsair. Either your motherboard has a problem (unlikely) or the sticks aren't matched, which they promise to do at the factory, so Corsair messed this one up.
__________________
__________________
"I loved the P182 so much that, when my wife's system was all noisy and needed all sorts of cleaning, I bought her one. Then, when I wanted a cat, I bought a P182. The P182 is not a cat per se, but it's still an excellent buy."
My System: 日夏子
|
|
#4
10th Sep 2008, 10:02
|
|||
|
|||
|
Cannot Run Memory In Dual Channel Mode (Help)
Sorry for not mentioning this in my original post, but the memory worked fine in dual channel mode before I upgraded my processor. Perhaps they may be a problem with the memory controller in cpu. In my opinion I think that if there where a problem with the memory controller, I would be having other stability problems. But every thing is running exceptionally well although its only running in single channel mode
|
|
#5
24th Sep 2008, 05:37
|
|||
|
|||
|
Cannot Run Memory In Dual Channel Mode (Help)
musnt be compat bud
|
|
#6
8th Oct 2008, 08:42
|
||||||||||||
|
||||||||||||
|
Cannot Run Memory In Dual Channel Mode (Help)
Hmmm this is interesting. And you say that you have updated to the latest BIOS?
__________________
Do you have any other DDR2 RAM in the house you can try it with? My System: #
|
|
|
|
| Bookmarks |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Using 2, 2 Gig. Sticks of Ram in Dual Channel Mode | P5200 | CPUs, Motherboards & RAM | 4 | 22nd Feb 2009 11:49 |
| Running DDR2 Memory in Dual Channel Config? | P5200 | CPUs, Motherboards & RAM | 2 | 15th Feb 2009 07:55 |
| Dual Channel RAM have to be the same on the other channel?? | 4D(Fordy(Ford) Ollie | CPUs, Motherboards & RAM | 31 | 29th Dec 2008 09:34 |
| Dual channel | zaone | CPUs, Motherboards & RAM | 4 | 7th Aug 2007 22:34 |
| Dual Channel RAM Memory | cain | CPUs, Motherboards & RAM | 6 | 31st Jul 2007 13:07 |
| Thread Tools | |
|
|
