lesser-equity

Magazine
Go Back   Computer Juice > Computer Hardware > Drives & Removable Media


Register


Reply
 
Thread Tools
  #1  
Old 14th May 2009, 11:05
New Member Group
 
Hi, new here- I have a Sony Vaio laptop with Windows Vista installed. A couple days ago i got the blue screen error unmountable boot volume. I tried loading my vista disk since it wouldn't load windows and the startup repair, system restore, complete pc restore, and windows memory diagnostic tool are not working because it says hard disk is not found. My last hope i think is the command prompt. I tried chkdsk because I've read on different forums to type that in and I'm not sure what to do with what comes up. Although I'm not sure that's working either as the last sentence is: "failed to transfer logged messages to the event log with status 50". I don't know what that means but there is a ton of info that came up before that I'm just not sure how much you would need to know.
If anyone knows what to do I thank you so much you have no idea- i really need my computer working again!
  #2  
Old 14th May 2009, 11:05
Administrator Group
 
Does the hard drive show in the BIOS?
__________________

My System: Hybr!d

Processor(s):
AMD Turion 64 x2 TL-64 2.2GHz
Motherboard:
HP nForce 560
RAM Memory:
2GB DDR2 PC2-5300
Graphics Card(s):
Nvidia 7150M Onboard Integrated
Sound Card:
5.1 Onboard Integrated
Hard Drive(s):
250GB 5400RPM SATA300
Optical Drive(s):
18x CD/DVDRW-DL ATA
Case / PSU:
Stock HP
Cooling:
Stock HP
Network / Internet:
10/100 Nic / 10MB Virgin Cable
Monitor(s):
17" WXGA+ HD BrightView Widescreen
Operating System(s):
Windows 7 Ultimate 32Bit
  #3  
Old 14th May 2009, 11:08
New Member Group
 
I'm not sure, when I get to the BIOS screen there is a line under the main tab that says hard disk drive: 160GB. Is that what you're talking about?
  #4  
Old 14th May 2009, 11:14
Administrator Group
 
BIOS tend to be different from make to make. Basically there should be a drive section and in that your various drives listed, CD, HDD etc. You should see their respective model numbers and be able to select them and edit their properties. If the drive is not displayed and/or you cannot edit it even though the options are there the drive is likely dead.
  #5  
Old 14th May 2009, 11:18
New Member Group
 
If i order the recovery disks, will that fix it or do i need to buy a new hard drive?
  #6  
Old 14th May 2009, 11:32
Administrator Group
 
If it's is dead, confirmed doing what I said above, then yes, you will need a new one and a Vista CD to reinstall your OS.
  #7  
Old 14th May 2009, 14:42
Donor Group
 
Try going back to the Command Prompt and type in :

chkdsk c: /f /v

and see if this helps. I hope I'm wrong, but normally when you get the "Failed to transfer .... status 50" message, it indicates the HDD cannot be written to and is faulty.
__________________

My System: Home Build

Processor(s):
AMD 64 x 2 Dual Core 5200+ 2.60GHz
Motherboard:
Asus M2V Rev 1.
RAM Memory:
4gb (3.25gb visible)
Graphics Card(s):
NVIDIA GeForce 7300 GS
Sound Card:
5.1 Reatek On-Board
Hard Drive(s):
250 gb SATA & 400gb SATA
Optical Drive(s):
Pioneer 110 x 2
Case / PSU:
Stock / 550w Silent
Cooling:
Stock
Network / Internet:
10/100 Nic / 20MB Virgin Cable
Monitor(s):
Fujitsu Siemens 22" TFT WS
Operating System(s):
Vista Ultimate x32/Windows 7 x64
Reply

Register
Thread Tools




Arabic Bulgarian Chinese (Simplified) Chinese (Traditional) Croatian Czech Danish Dutch English Finnish French German Greek Hebrew Hungarian Italian Japanese Korean Latvian Lithuanian Norwegian Polish Portuguese Romanian Russian Serbian Slovak Spanish Swedish Thai Turkish Ukrainian

Copyright ©2006 - 2009 Computer Juice.

Powered by vBulletin® Copyright ©2000 - 2009 Jelsoft Enterprises Ltd. SEO by vBSEO ©2009, Crawlability, Inc.