lesser-equity

Magazine
Go Back   Computer Juice > Computer Software > Windows Operating Systems


Register


Reply
 
Thread Tools
  #1  
Old 29th Jan 2009, 02:38
Member Group
 
My machine starts to load up fine that is until it gets to the windows xp logo. The bar goes across 2 or 3 times and then just stops and thats all it does.
  #2  
Old 29th Jan 2009, 03:19
Administrator Group
 
Do you have an XP CD? Run a checkdisk on the hard drive to fix any errors.
  1. Insert your Windows XP CD into your computer's CD-ROM drive and restart your computer. If your computer is not booting into Windows, you will still need to have your computer powered on to open the CD-ROM drive and insert the CD before restarting.
  2. Many newer computers are set to boot CDs by default or have an option to temporarily change the boot order. Look for one of these messages as your computer starts:
    • F12 (or another key) = Boot Menu
    • ESC (or another key) to select boot device
    • Press any key to boot from CD
  3. If you needed to press a key for a boot menu or to select a boot device, you should now have a menu of the devices your computer can try to boot from. Choose your CD-Rom drive and press Enter.
  4. When you see the "Press any key" message, your computer is ready to boot from the Windows XP CD. Just press Enter. Your system will load files and bring you to the Windows XP Setup screen.
  5. At the Windows Setup screen, press R to enter the Recovery Console.
    • NOTE: If you are unable to access the recovery console, your CD may be damaged, or the problem could be more severe and require professional system recovery.
  6. You will enter the Recovery Console and be asked to choose which Windows installation you would like to log into. Most users will only have one choice.
  7. You will be prompted to enter the administrator password. This is the password set for the user Administrator. You may have set this password when you first were configuring your computer. If you are uncertain what password to enter here, try leaving the line blank and just pressing ENTER.
  8. You will be presented with a C: prompt. Type chkdsk /r and press ENTER.
Let us know how you get on.
__________________

My System: Hybr!d

Processor(s):
AMD Turion 64 x2 TL-64 2.2GHz
Motherboard:
HP nForce 560
RAM Memory:
2GB DDR2 PC2-5300
Graphics Card(s):
Nvidia 7150M Onboard Integrated
Sound Card:
5.1 Onboard Integrated
Hard Drive(s):
250GB 5400RPM SATA300
Optical Drive(s):
18x CD/DVDRW-DL ATA
Case / PSU:
Stock HP
Cooling:
Stock HP
Network / Internet:
10/100 Nic / 10MB Virgin Cable
Monitor(s):
17" WXGA+ HD BrightView Widescreen
Operating System(s):
Windows 7 Ultimate 32Bit
  #3  
Old 29th Jan 2009, 03:20
Member Group
 
I've just had a look for the cd in the box but can't find it.
  #4  
Old 29th Jan 2009, 05:28
Donor Group
 
Then you will have to borrow one .... without the disk, you are snookered.
__________________

My System: Home Build

Processor(s):
AMD 64 x 2 Dual Core 5200+ 2.60GHz
Motherboard:
Asus M2V Rev 1.
RAM Memory:
4gb (3.25gb visible)
Graphics Card(s):
NVIDIA GeForce 7300 GS
Sound Card:
5.1 Reatek On-Board
Hard Drive(s):
250 gb SATA & 400gb SATA
Optical Drive(s):
Pioneer 110 x 2
Case / PSU:
Stock / 550w Silent
Cooling:
Stock
Network / Internet:
10/100 Nic / 20MB Virgin Cable
Monitor(s):
Fujitsu Siemens 22" TFT WS
Operating System(s):
Vista Ultimate x32/Windows 7 x64
  #5  
Old 29th Jan 2009, 14:03
Member Group
 
Ok thanks.
Reply

Register
Thread Tools




Arabic Bulgarian Chinese (Simplified) Chinese (Traditional) Croatian Czech Danish Dutch English Finnish French German Greek Hebrew Hungarian Italian Japanese Korean Latvian Lithuanian Norwegian Polish Portuguese Romanian Russian Serbian Slovak Spanish Swedish Thai Turkish Ukrainian

Copyright ©2006 - 2009 Computer Juice.

Powered by vBulletin® Copyright ©2000 - 2009 Jelsoft Enterprises Ltd. SEO by vBSEO ©2009, Crawlability, Inc.