|
|
#1
4th Aug 2008, 16:06
|
|||
|
|||
|
A problem has been detected and windows has been shut down to prevent damage to your computer.
If ths is your first time you,ve seen this stop error screen, restart you computer.(I have seen this message several times already!) If this screen appears again, follow these steps: Check to be sure you have adequate disk space. (Which I Do) If A driver is identified in the stop message, disable the driver or check with the manufacture for drive updates. Try changing video adapters. Check with your Hardware vendoe for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable componets, restart your computer , Press F8 to select Advanced Startup Options, and then select safe mode. Technical information: *** STOP: 0x0000008E (0xc0000005,0xF74139A8,0xF6FD275C,0x00000000) ***setupdd.sys - Address base at F73EC000, DataStamp 41107c8f And thats all the message says oh and does anyone know what is wrong? Please Help! It's Not detecting my harddrive!!! Oh And This is a SATA hardrive! I have tried replacing my RAM but that did not work! But yet when I inserted a SD Card it found that and would let me Install! Please Help! Thanks PCHardDrive |
|
#2
4th Aug 2008, 16:09
|
||||||||||||
|
||||||||||||
|
When you boot of the XP install CD it will say hit F6 (I think) to install drivers, it is at this point you insert you SATA driver disc. You can make a SATA driver disc using your motherbaord driver CD or going to you mobo makers website.
__________________
My System: Hybr!d
|
|
#3
4th Aug 2008, 16:11
|
|||
|
|||
|
I have allready tried that but I will try to do it again and let you know!
|
|
#4
4th Aug 2008, 16:12
|
|||
|
|||
|
Done right it should work.
|
|
#5
4th Aug 2008, 16:12
|
|||
|
|||
|
Ya it could not find anythinh just like before?
|
|
#6
4th Aug 2008, 16:13
|
|||
|
|||
|
You need to explain better, what happens exacly when you hit f6?
|
|
#7
4th Aug 2008, 16:14
|
|||
|
|||
|
Try this:
Enter the bios / set the sata controller to "IDE mode" then click save and exit the bios |
|
#8
4th Aug 2008, 16:16
|
|||
|
|||
|
Well frst of all this is what it says when I am asked to select a Paration...
No Hard Drive Found! Oh and here is what it says when it asks me to select a Partition. Windows Xp Professional Setup ======================= The following list shows the existing partitions and unpartitioned space on this computer. Use the UP and DOWN ARROW keys to select an item in the list. To Set up Windows XP on the selected item, press ENTER. To create a partition in the unpartitioned space, press C. To delete the selected partition, press D. Unknown Disk (There is no disk in this drive.) Unknown Disk (There is no disk in this drive.) Unknown Disk (There is no disk in this drive.) Unknown Disk (There is no disk in this drive.) |
|
#9
4th Aug 2008, 16:18
|
|||
|
|||
|
Yeah, like I said unless you Hit F6 when it asks if you want to install drivers (before the screens you mention above) and install your SATA drivers it wont find a hard drive will it.
|
|
#10
4th Aug 2008, 16:23
|
|||
|
|||
|
This is what it says
Windows Setup ============= Setup could not find a floppy drive on your machine to load OEM Drivers from floppy disk. * Press ESC to cancel loading OEM drivers * Press F3 to quit setup. I don't even have a floppy disk drive in my PC! |
